Complete Heating and Cooling for Year‐Round Comfort and Energy Savings

The DC‐GSX160481, 4 Ton, central air conditioning system will help reduce energy consumption throughout the life of the system. Goodman’s Direct Comfort SMARTCOIL™ 5mm tube condensing coil design optimizes the heat transfer ability of R‐410A refrigerant compared to standard 3/8”copper tubing. The coil is made of rifled refrigeration‐grade copper tubing and corrugated aluminum fins in a design that maximizes surface area. These high‐quality components together cool your home effectively.

DC‐GSX160481 | Outdoor Heat Pump Condensing Unit

The Goodman’s Direct Comfort DC‐GSX160481 uses the chlorine‐free refrigerant R‐410A and features operating sound levels that are among the lowest in the heating and cooling industry. With its 16 SEER rating, the DC‐GSX160481 will help reduce energy consumption throughout the life of the system.

Standard Features:

• Energy‐efficient compressor
• Factory‐installed filter drier
• Copper tube/aluminum fin coil
• Service valves with sweat connections and easy‐access gauge ports
• Contactor with lug connection
• Ground lug connection
• AHRI Certified
• ETL Listed

Cabinet Features:

• Goodman’s Direct Comfort louvered sound control top design
• Steel louver coil guard
• Heavy‐gauge galvanized‐steel cabinet
• Attractive Architectural Gray powder‐paint finish with 500‐hour salt‐spray approval
• Top and side maintenance access
• Single‐panel access to controls with space provided for field installed accessories
• When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for hurricane‐type winds Anchor bracket kits available

DC‐CAPF4961D6 | Indoor Unit Coil Component

The Goodman’s Direct Comfort DC‐CAPF4961D6 Upflow/Downflow Cased Indoor Air Conditioner Evaporator Coil is made for use with split‐system air conditioning and Evaporator systems. The all‐aluminum evaporator coil is constructed from aluminum tubing, corrugated fins and panels giving you a single metal solution for outstanding, time‐tested, heat transfer performance properties. Cased coil for upflow/downflow applications.

Additional Features

• Helium pressure‐tested during construction
• Finished pressure tested and vacuum tested with leak “sniffing” by “hound‐dog”
• Aluminum‐lanced sine fin design for optimum heat transfer
• Thick‐walled aluminum tubing provides superb strength
• Copper coil stud for connecting copper liquid suction lines
• Suitable for use with R‐410A and R‐22 refrigerants
• Rust‐resistant, thermoplastic drain pans feature a low water‐retention design
• Check flowrater expansion device for heat pump or cooling‐only applications
• Rifled aluminum tubing and louvered aluminum fin coils
• Foil‐face insulation
• Galvanized‐steel, leather‐grain finish
• Architectural Gray paint finish on cased coils
• Split‐seam front for easy access
• AHRI certified
• ETL listed

DC‐GME80805DX | Gas Furnace

Goodman's Direct Comfort DC‐GME80805DX variable‐speed, two‐stage 80,000 BTU gas furnace offers reliable performance and time‐tested durability. A quiet, four‐speed direct drive blower motor is coupled with a two‐stage gas valve that allows installer to turn on two‐stage operation with the flip of a dipswitch. ComfortNet™ Communications System compatible. The benefits of automatic system installation, simplified installation wiring and active system diagnostics are yours with any ComfortNet control.

Goodman's Direct Comfort DC‐GME80805DX energy‐efficient 80,000 BTU gas furnace with two‐stage heating and a variable speed circulating blower provides efficient and economical performance. Unlike single‐stage gas furnaces that operate "all on" or "all off," a Goodman brand variable‐speed gas furnace typically runs up to 90% of the time in the low‐speed capacity on most days. But when the temperature outside is frightfully cold, this furnace quietly ramps up to high‐speed capacity to deliver all the warm, comfortable heat your home needs. When operating at low‐speed levels, your Goodman's Direct Comfort gas furnace consumes less energy to keep your home comfortable. In addition, the 80% AFUE rating on this gas furnace means that 80 cents of every $1 of heating energy expense warms your home.

Additional Features

• Energy‐efficient, multi‐speed ECM blower motor
• Heavy‐duty aluminized steel dual diameter, tubular heat exchanger
• Two‐stage convertible gas valve automatically adjust to high or low stage
• Durable Silicon Nitride igniter
• Quiet single speed draft inducer
• Self‐diagnostic control board with constant memory fault code
• Color‐coded low‐voltage terminals with provisions for electronic air cleaner and humidifier
• Multi‐speed blower motor
• Low continuous fan speed options offer quiet air circulation
• California Low NOx emissions models available
• AHRI Certified; ETL Listed
• Multi‐position installation: upflow, horizontal left or right with kit
• Cabinet air leakage (QLeak) ≤ 2%
• Convenient left or right connection for gas and electrical service
• Heavy‐gauge steel cabinet with durable baked‐enamel finish
• Fully insulated heat exchanger and blower section

What’s Included

Your Direct Comfort Goodman Gas Furnace System from Heat & Cool Comes With:

• DC‐GSX160481 | Outdoor Heat Pump Condensing Unit
• DC‐CAPF4961D6 | Indoor Unit Coil Component
• DC‐GME80805DX | Gas Furnace
• DC‐TXV‐48 Thermal Expansion Valve
• Technical Specification
• Installation Manual
• Brochure
• Manufacturer Warranty