Choose Goodman For Benefits That Extend Beyond Your Front Door

The DC‐GSX140241, 2 Ton, central air conditioning system will help reduce energy consumption throughout the life of the system. Goodman’s Direct Comfort SMARTCOIL™ 5mm tube condensing coil design optimizes the heat transfer ability of R‐410A refrigerant compared to standard 3/8”copper tubing. The coil is made of rifled refrigeration‐grade copper tubing and corrugated aluminum fins in a design that maximizes surface area. These high‐quality components together cool your home effectively.

DC‐GSX140241 | Outdoor Heat Pump Condensing Unit

The Goodman’s Direct Comfort DC‐GSX140241 uses the chlorine‐free refrigerant R‐410A and features operating sound levels that are among the lowest in the heating and cooling industry. With its 14 SEER rating, the DC‐GSX140241 will help reduce energy consumption throughout the life of the system.

Standard Features:

• Energy‐efficient compressor
• Factory‐installed filter drier
• Copper tube/aluminum fin coil
• Service valves with sweat connections and easy‐access gauge ports
• Contactor with lug connection
• Ground lug connection
• AHRI Certified
• ETL Listed

Cabinet Features:

• Goodman’s Direct Comfort louvered sound control top design
• Steel louver coil guard
• Heavy‐gauge galvanized‐steel cabinet
• Attractive Architectural Gray powder‐paint finish with 500‐hour salt‐spray approval
• Top and side maintenance access
• Single‐panel access to controls with space provided for field installed accessories
• When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for hurricane‐type winds Anchor bracket kits available

DC‐AWUF250316 | Indoor Unit Air Handler

The job of air conditioning isn't just to cool or heat a room. You depend on it for dehumidification, air filtration and essential ventilation. The Direct Comfort Wall‐Mount Air Handlers, AWUF surpasses performance standards with notable attributes such as a multi‐speed PSC motor, multiple airflow positions, minimal air leakage and grooved aluminum tubes mechanically bonded to aluminum ripple‐edged fins for industry leading heat transfer.

The DC‐AWUF250316 air handler boasts a direct‐drive, multi‐speed motor which allows air volume variation for heating and cooling applications.

Additional Features:

• Equipped with a Check Flowrater for cooling‐only and heat pump operation
• Direct‐drive, multi‐speed motors allows air volume variation for heating/cooling
• Multi‐speed ECM: AWUF19, 25, 31, 32, 37
• Multi‐speed PSC motor: AWUF18, 24, 30, 36
• Sequence‐controlled, rust‐resistant nickel chromium heating elements of 3, 5, 8, and 10 kW
• Aluminum tubing coils on all models
• Cabinet air leakage less than 2.0% at 1.0 inch H₂O when tested in accordance with ASHRAE standard 193
• Cabinet air leakage less than 1.4% at 0.5 inch H₂O when tested in accordance with ASHRAE standard 193
• Factory‐installed pull‐type disconnect
• Thermoplastic drain pan with bottom primary and secondary drain connections
• Built‐in filter rack (filter included)
• Large chassis (2½‐ and 3‐ton units)

What’s Included

Your Goodman Direct Comfort Central AC System from Heat & Cool Comes With:

• DC‐GSX1402411 | Outdoor Heat Pump Condensing Unit
• DC‐AWUF250316 | Indoor Unit Air Handler
• Brochure
• Technical Specification
• Installation Manual
• Manufacturer Warranty