• R-410A environmentally friendly refrigerant
• High-efficiency scroll compressor
• Factory-installed liquid line filter dryer
• 850-RPM condenser fan motor
• Copper tube/aluminum fin coil
• Brass liquid and suction line service valves
• Contactor with lug connection
• Ground lug connection
• ARI Certified; ETL Listed
• Unique Klimaire sound control top design
• Steel louver coil guard
• Heavy-gauge galvanized-steel cabinet
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• When properly anchored, meets the 2001 Florida Building Code unit integrity requirements for hurricane-type winds

• Unique Goodman sound control top design
• Steel louver coil guard
• Heavy-gauge galvanized-steel cabinet
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• When properly anchored, meets the 2001 Florida Building Code unit integrityrequirements for hurricane-type winds

The Goodman 2006 AEPF Revision A model Multi-Position,
Multi-Speed Air Handler is suitable for use with refrigerants R-410A and R-22. Revision B models are suitable for R-22 only. ARPT models with a 3-digit nominal capacity range are R-22 only. ARPF models feature a check flowrater expansion device while the ARPT uses a check expansion valve. These units are fully painted with an attractive Architectural Gray finsh and may be installed in a variety of locations.

Standard Features

• Check flowrater expansion device for cooling and heat pump applications (AEPF)
• Check expansion valve for cooling and heat pump applications (AEPT) Variable-speed motor
• Provides constant CFM over a wide range of static pressure conditions independent of duct system; provides low CFM for efficient fan-only operation
• Up to 14 field-selectable airflow settings can be adjusted to optimize the system’s CFM for each individual mode of operation
• Improved humidity control and comfort
• Compatible with heat pumps and variable-capacity cooling applications
• Multi-position—upflow, downflow or horizontal installations
• Built-in coil has horizontal, vertical, and downflow drain pans with secondary drain connections
• 5 kW to 21 kW electric heat kit available as a field-installed option

• Fully painted cabinet with attractive Architectural Gray finish
• Built-in filter rack for 1” filter (filter not included)
• Low-voltage cabinet connections; control circuit is arranged to permit staging
• Power supply on top; low-voltage entry on top or side
• Factory-sealed to achieve 2% or less leakage rate at 1.0” water gauge external duct static pressure